Guide for Architects and Specifiers: Roofing and Cladding Products Outside of E2 Provisions
1. Introduction Our roofing and cladding products offer innovative alternatives to standard building code provisions, specifically those within the E2 (External Moisture) clause. This guide will help you navigate the use of our products in compliance with local council requirements, along with the support and information we provide to ensure successful project outcomes.
2. Understanding the Building Code and E2
E2 - External Moisture: This section of the building code addresses the prevention of moisture entering the building through the roof, walls, and other external elements.
Alternative Solutions: If your project requires roofing or cladding solutions that fall outside of the E2 provisions, our products can offer alternatives, provided they meet the required performance standards for moisture management, durability, and safety.
3. Council Requirements Each local council may have its own specific requirements when it comes to roofing and cladding materials that do not strictly adhere to the E2 provisions. To ensure compliance, we recommend the following:
Consult with Linked Group: Before starting your project, engage with us to discuss your intended use of our roofing and cladding products. This ensures you align with the correct material, detailing, and documentation requirements and expectations.
Provide evidence of performance: You may need to provide documentation demonstrating that our products meet or exceed the performance standards outlined in the building code, especially concerning weather-tightness, durability, and fire safety, or your building may exceed 10m in height
4. Support and Information We Provide We understand the importance of having the right resources and documentation for compliance. To assist you, we provide the following:
Product Specifications: Detailed technical datasheets and specifications that outline the performance characteristics of our products (e.g., moisture resistance, durability, fire rating).
Alternative Solution Documentation: For products that fall outside of E2 provisions, we can provide evidence of their performance and how they meet or exceed the requirements of the building code.
Testing and Certification Reports: Where applicable, we provide independent testing and certification reports that demonstrate compliance with building standards.
Design and Installation Guidance: Clear guidance on the proper design and installation techniques to ensure our products are used to their full potential, reducing the risk of non-compliance.
5. Steps for Using Our Products as an Alternative Solution
Step 1: Product Selection: Choose the roofing or cladding product from our range that best suits the project requirements.
Base material selection is a crucial element in ensuring the long-term durability and performance of the building envelope. At this stage, it’s essential to choose the most appropriate material for your project, considering factors like the environmental conditions, location, and application needs.
We offer our roofing and cladding products in a range of premium materials to meet different project specifications:
Pre-painted Steel: Available in 0.55BMT options like Colorsteel, Colorcote, and Uni Cote, these materials provide excellent durability and aesthetic options.
Aluminum: Our 0.80BMT aluminum options come with high-quality Euramax 2-layer or 3-layer PVDF paint systems, which are engineered to provide superior resistance to corrosion, UV degradation, and harsh weather conditions.
Zinc: We supply VMZINC, an advanced, high-performance zinc product that offers exceptional longevity and distinctive aging characteristics.
Copper and Stainless Steel: These materials offer unique aesthetic qualities and are known for their longevity and resistance to the elements, making them ideal for high-end projects or special applications.
Selecting the correct material based on its temper, application, and location is key to ensuring the longevity of the building envelope. For instance, materials used in coastal areas or locations with high UV exposure may require more robust protective coatings. Similarly, materials in highly corrosive environments, such as industrial zones, may need to be selected for their enhanced durability and resistance to wear and tear. By understanding the unique properties of each material, you can ensure that your choice not only complements the design but also contributes to the building's long-term performance.
Step 2: Review Council Requirements: Consult with the local council to confirm any specific regulations or additional information required for approval.
Step 3: Submit Documentation: Provide the council with the necessary documentation for our products, such as specifications, testing reports, and performance evidence.
Step 4: Request Confirmation: Once the documentation is submitted, request confirmation from the council that the product is approved for use on the project.
Step 5: Implement Installation: Consult with Linked Group and their licensed installers to ensure the project is installed and managed to the highest level. We will refer installers fit for size, location and capabilities.
6. Key Benefits of Using Our Products
Custom Solutions: Our products offer flexibility in design, providing innovative solutions that can be tailored to your specific project needs.
Compliance Support: We provide all the necessary documentation and support to help you navigate the building code and local council requirements.
Performance Excellence: Our products are tested and proven to perform in real-world conditions, ensuring long-term durability and weather-tightness.
7. Contact Us for Further Assistance If you need additional support or have any questions about our products, compliance, or technical specifications, please don’t hesitate to get in touch with our team. We are here to help ensure your project meets both regulatory requirements and your client’s expectations.
Conclusion By following this guide, you can confidently use our roofing and cladding products as alternative solutions to the E2 provisions, ensuring compliance with the building code and local council requirements. With our comprehensive support, your project will be well-equipped for success.
Licensed Installers of Architectural Products
At Linked Group, we take pride in collaborating with our network of licensed installers who play a crucial role in delivering our top-quality roofing and cladding solutions. These trusted partners are seasoned professionals, meticulously selected for their expertise in installing our premium products to the highest standards. With their extensive industry knowledge and unwavering dedication to excellence, you can trust that your project will be executed with precision and meticulous attention to detail. Together, we strive to create exceptional outcomes that meet the unique needs of every client
Auld Roofing & Cladding :
Manunu Auld
0279416194
Taranaki Region
Euroclass Roofing
Lance Inglis
021 030 4266
Info@euroclassroofing.co.nz
Auckland Region
Upper North Island Region
Johnson Brothers Roofing
Joel Johnson 021 296 9988
Luke Johnson 021 034 0275
johnsonbrothersroofing@yahoo.co.nz
Whangarei Region
Upper North Island Region
Kaimai Roofing
Ben Jefferson
021 025 458 80
kaimairoofing@gmail.com
Bay of Plenty Region
Mason Roofing
Davis Mason
021 772 909
Bay of Plenty Region
Roofing Craftsmen
Dave Innes
027 509 3011
Bay of Plenty Region
Waikato Region
Prestige Roofing
Michael Mead
021 442 393
Waikato Region
Vision Roofing
Ethan Millar
027 535 114
Bay of Plenty Region